A.J. Antunes & Co TCE 8253420060 - Manual

A. J. ANTUNES & CO. www.ajantunes.com 180 Kehoe Blvd., Carol Stream, Illinois 60188
Dimensions
Panel Cutout
Panel Installation
IMPORTANT
Please read these instructions carefully to assure
correct installation. This equipment must be
installed by a licensed electrician. Prior to being
put into operation, check all wiring and function of
the unit.
TCE Installation Information
Specifications
Sensor Type: Thermocouple (Type J or K)
Accuracy: 1% Full Scale ± LSD
Power: 12 VAC/DC, 24 VAC, 115 VAC, 230 VAC, 50/60 Hz.
Controls: On/Off
Output: 3A Relay, Standard (Resistive Load) or
12-16 VDC @ 30 mA
Temperature Range: 50º to 990ºF (10ºC to 530ºC)
Ambient Operating Temperature: -30ºF to 140ºF
(-34ºF to 60ºC)
Ambient Storage Temperature: -40ºF to 180ºF
(-40ºF to 82ºC)
Connections: Screw Terminal
Set Point Adjustment: External Knob or Recessed
Screw Drive Adjustment
Display: 3-Digit LED (0.56” Ht.)
Package: 1/8 DIN Panel Mount Anodized Aluminum Case
Shipping Weight: 2 lbs. (.9 kg)
4.3”
(109 mm)
2.11”
(54 mm)
4.27”
(108 mm)
3.57”
(91 mm)
1.72”
(44 mm)
0.63”
(16 mm)
4.17”
(106 mm)
TCE Side View
Panel Knockout: 1.77” Ht. x 3.62” Wd. (45 mm x 92 mm)
NOTE: Dimensions are for reference only.
3.62”
1.77”
1-630-784-1000 Fax: 630-784-1651 Page 1 of 4 P/N 1011092 Rev. A 11/11
1-800-253-2991
Panel Locking Bars
and 6-32 Screws
Panel
Insert the unit into the panel from the front.
Secure in place with the two locking bars and
screws provided with the unit.