A.J. Antunes & Co FGM-H150 8271007150 User Manual

Versa plus gas pressure switches, Dimensions, Ranges available specifications

Advertising
background image

1-630-784-1000 Fax: 630-784-1651

Page 1 of 4

P/N 1011063 Rev. B 06/12

1-800-253-2991

A. J. ANTUNES & CO. www.ajantunes.com 180 Kehoe Blvd., Carol Stream, Illinois 60188

Versa Plus Gas Pressure Switches

Versa Plus Gas Pressure Switches by Antunes Controls

monitor gas pressure and break the electrical control

circuit when pressure drops below or rises above the

desired setpoint. The gas pressure settings are adjustable

and available in manual or automatic reset operation.

These switches are sturdy and constructed with a dura-

ble plastic electrical enclosure and a die-cast aluminum

inlet base.

Dimensions

IMPORTANT

Please read these instructions carefully to assure

correct installation. This equipment must be

installed only by a licensed electrician who is

experienced with combustion safeguard control

systems and understands the functions of inter-

locking switches, such as gas pressure switches.

Prior to being put into operation in conjunction

with the combustion safeguard systems, all

switches should be tested for proper range setting

and proper wiring. Check piping connections and

switch house for leaks with a soap bubble test. All

exhaust fans and blowers should be inspected and

checked for proper rotation prior to starting up.

Versa Plus Gas Pressure Switches Installation Information

Gas (Air) Inlet 1/4" NPT

3"

(76 mm)

2 11/16"

(68 mm)

3"

(76 mm)

1 3/8"

(35 mm)

1 11/16"

(43 mm)

13/16"

(21 mm)

1 5/32"

(30 mm)

3"

(76 mm)

Reset Buttom

(Manual Only)

1/2" Conduit

Knockout

Gas (Air) Inlet 1/4" NPT

3"

(76 mm)

2 11/16"

(68 mm)

3"

(76 mm)

1 3/8"

(35 mm)

1 11/16"

(43 mm)

13/16"

(21 mm)

1 5/32"

(30 mm)

3"

(76 mm)

Reset Buttom

(Manual Only)

1/2" Conduit

Knockout

Gas (Air) Inlet 1/4" NPT

3"

(76 mm)

2 11/16"

(68 mm)

3"

(76 mm)

1 3/8"

(35 mm)

1 11/16"

(43 mm)

13/16"

(21 mm)

1 5/32"

(30 mm)

3"

(76 mm)

Reset Buttom

(Manual Only)

1/2" Conduit

Knockout

Ranges Available

Specifications

Electrical Ratings: 6A @ 120 VAC, 6A @ 240 VAC, 1/8

HP 120 & 240 VAC
Adjustable Operating Pressure: 1.2 to 150 mbar

0.5" W.C. to 60" W.C. (different ranges)

NOTE: To avoid initial line fill pressure spikes, unit should

be placed downstream of the regulator.
Max. Surge Pressure: 7 PSI (482 mbar)
Ambient Operating Temperature: 5°F to 180°F

(-15°C to 82°C)
Field wiring to be rated @ 90°C (194°F) for maximum

ambient
Shipping Weight: 0.5 lbs. (.227 kg)
Options:

4-Pin DIN Connector

Neon Lamp Indicator

Side Mounting

Low Ranges

Model

Part No.

W.C.

mbar

Automatic Reset

FGA-L010

8261001010

0.5"–4"

1.2–10

FGA-L050

8261002050

1"–20"

2.5–50

FGA-L110

8261003110

5"–44"

12–110

Manual Reset

FGM-L 010

8271001010

0.5"–4"

1.2–10

FGM-L 050

8271002050

1"–20"

2.5–50

FGM-L 075

8271003075

5"–30"

12-75

FGM-L 136

8271004136

7"–55"

17-136

High Ranges

Model

Part No.

W.C.

mbar

Automatic Reset

FGA-H010

8261005010

0.8"–4"

2–10

FGA-H050

8261006050

2"–20"

5–50

FGA-H087

8261007087

5"–35"

12–87

Manual Reset

FGM-H 050

8271005050

2"–20"

5–50

FGM-H 087

8271006087

8"–35"

20–87

FGM-H 150

8271007150

10"–60"

25–150

Note: Dimensions are

for reference only.

Advertising