Ferguson FT-8100 HD - Manual (Page 2)

2
WARNING !!!
On the USB Memory Function for FT-8100 HD model, user can make recording or playing function
using by external USB devices such as USB Flash Memory Disk or external USB HDD(Hard Disk).
However, below condit ion should be remarked before applying.
REMEMBER:
1. To use the external USB device, the device has to be supported by USB
2.0. In case of the USB flash memory disk for recording, we suggest to
use USB2.0 by SLC type with writing speed over 9.0MB/s for stable
recording and playing.
2. Please make sure the USB device condition is set as FAT32 before using.
To make FAT32 condition, user can make format function on their
personal PC.
3. External hard drives HDD should contain their own power supply unit.
CAUSION
1. Please do not remove the external USB device from the receiver during the recording or playing
in USB mode. Unexpected action could make damaged condition for either the receiver and the
external USB device.
2. Do not touch with wet hand in any cases.