Using the oven control, Setting electronic clock, Setting minute timer – Amana Electric Smoothtop Range ACF4255A User Manual

Page 14: Flashing display, Timer signal

Advertising
background image

14

Using the Oven Control

Setting Electronic Clock

12 hour clock does not display

AM

,

PM

or military time. When power is

connected or restored, display flashes until CLOCK or CANCEL pad is
pressed.

1.

Press CLOCK pad.

2.

Press

digit pads (1 through 0) until correct

time-of-day displays.

3.

Press START pad to set time, or time is set
after 5 seconds of no adjustment.

Setting Minute Timer

Timer is a timer only. Electronic timer does not control bake, broil or
self-clean function. Timer can be set from 1 minute up to
11 hours and 59 minutes.
1.

Press TIMER ON/OFF pad.

2.

Press digit pads (1 through 0) until desired
time displays.
• Timer begins counting down automatically

after time is entered.

• To view clock while timer counts down,

press CLOCK pad. Timer will return after
approximately 3 seconds of no input.

3.

Press and hold TIMER ON/OFF pad to cancel timer signal.
• After time elapses, timer beeps three one-second tones, and

then once approximately every 30 seconds until CANCEL is
pressed. END is also displayed when the timer finishes.

Resetting and Canceling Timer
To reset the time when remaining time is displayed, press
TIMER ON/OFF pad, then use the digit pads to enter the new time.
To cancel timer when remaining time is displayed or when signal is
beeping, press and hold TIMER ON/OFF pad for approximately
3 seconds or press CANCEL pad. CANCEL will stop all cooking
functions if the oven is in use.

Flashing Display

When power is connected
or interrupted, oven display flashes.
Press CLOCK to reset display.
Clock may need to be reset.

Timer Signal

When time elapses, timer will sound
three one-second beeps and then once

every 30 seconds.

END

also displays.

Press TIMER ON/OFF pad to stop timer
and return to clock display.

Advertising