ARCHOS 400 - Manual (Page 12)

12
To lock the Gmini 400 buttons, press and hold
the left function button for three seconds. The
Gmini 400 will display the message “Buttons
locked!” on the bottom of the screen. Press this
again for three seconds to unlock the buttons.
What the Icons indicate
Status Play Order Play Mode
Stopped
- no icon -
Play once
See section 14.2
Blinks while playing
a track
Repeat playing
Current track is
paused
Shuffl e (random)
track selection
Recording a track Playing a playlist
3.2
Playing Through your Stereo System
On your HiFi there are two RCA type
connectors that are labeled Aux in, CD
in, or Line-in. Typically they are color
coded white and red for left and right
stereo channels respectively. Just take the
included A/V cable and plug it into the
Gmini 400 headphone jack. Plug the red
and white connectors into the Aux in,
CD in, or line-in of your stereo system.
Do not plug the yellow (video) connector
into anything. On the front of your stereo,
select the corresponding auxiliary input
or CD input that you plugged into on the back of your HiFi system. Press
Play and then adjust the Gmini 400 volume (UP/DOWN buttons) in order
to supply your stereo system with a signal that is neither too weak nor
too strong. If the sound is distorted, you will need to reduce the Gmini
400’s volume.