HID Juniper and ActivID AS OOB - Manual (Page 12)

4TRESS FT2011 Out-of-Band Authentication and Juniper Secure Access | RADIUS Channel Integration Handbook
External Release | © 2012-2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved. Page | 12
• To submit secondary user credentials to enable two-factor authentication to access the
Secure Access device, select the option, Additional authentication server.
• Authentication #2—Select 4TRESS AS from the drop-down list (the name of the
authentication server might be different).
• By default, Secure Access submits the <username> session variable that holds the same
username used to sign in to the primary authentication server. To automatically submit a
username to the secondary server, select the option, predefined as.
• If you want to prompt the user to manually submit a password to the secondary server
during the Secure Access sign-in process, then select the option, Password is specified
by user on sign-in page.
• Select the option, End session if authentication against this server fails.
3. At the bottom of the page, click Save Changes.
4. To configure one or more role mapping rules (based on the role defined previously), select the Role Mapping
tab.