HID Crescendo C1150 Administration Guide - Manual (Page 99)

HID Global Crescendo C1150 – Administration Guide
November 2013 Page 99 of 115
© 2013 HID Global Corporation. All rights reserved.
3. From the Device Type drop-down list, select the type of device to initialize (in this case,
smart card).
4. From the Device Reader drop-down list, select the reader that you want to use with the
device that you have selected.
5. Select Assign user after Initialization to immediately assign the device to a user after
you initialize it.
N OTE You MUST select this option if using ActivClient middleware.
6. In the PIN Parameters section of the window, select the required options:
 PIN MAX number of tries - enter the maximum number of consecutive wrong PIN
codes that a user can enter on a device before the device automatically locks.
When set to zero (0), the user can enter an unlimited number of consecutive wrong
PIN codes. The default number for the selected device profile is displayed in this
field.
 Initial PIN Code - initializes all the devices with the same initial PIN code value
specified in the field. It is recommended that users change the initial PIN code
during the first connection. You cannot enter a “weak” PIN code. Examples of weak
PIN codes are 1357, 1234, and 1111 (ones with a constant amount between each
of the digits).
 Generate Random PIN Code - select this option to have the AAA Server