HID DTC1000/4000/4500 User Guide LINUX & MAC - Manual (Page 37)

© 2011 HID Global Corporation All rights reserved
Fargo DTC1000/DTC4000/DTC4500 CUPS Driver User Guide - LINUX (L001452, Rev 1.2) 37
Reviewing the Back Area (continued)
Command Line Usage CUPS option Description
PrintAreaBackapply =
PrintAndOverlay Back Apply Area(s) =
Print and Overlay Print area options are
applied to print and overlay
as described in the table
above.
PrintAreaBackapply =
OverlayOnly Back Apply Area(s) =
Overlay Only Print area options from the
table above are applied to
overlay only.
PrintAreaBackapply =
PrintOnly Back Apply Area(s) =
Print Only (No Overlay) Print area options from the
table above are applied to
print only. Use this option for
ribbons without overlay.
(Note: If you are using Split
Ribbon Print, this option
must be set to Print Only.)
VisualSecurityArea = None Visual Security Solution
= No Visual Security Sets the Visual Security
Area to no visual Security.
VisualSecurityArea =
UpperLeft Visual Security Solution
= Upper Left Sets the Visual Security
Area to upper left.
VisualSecurityArea =
UpperRight Visual Security Solution
= Upper Right Sets the Visual Security
Area to upper right.
VisualSecurityArea =
LowerLeft Visual Security Solution
= Lower Left Sets the Visual Security
Area to lower left.
VisualSecurityArea =
LowerRight Visual Security Solution
= Lower Right Sets the Visual Security
Area to lower right.