HID OMNIKEY 5427 CK Keyboard Wedge User Guide - Manual (Page 20)

OMNIKEY Keyboard Wedge Configuration, 5x27-902, Rev D.0
Page 20 of 23 November 2013
HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly
restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and
are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement,
please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.
7. Select the Card Data Manipulation tab.
8. Click the check box in the PACS row of Filtering box.
9. Make sure HEX is selected in PACS row of Format box.
10. Enter 246 (decimal for f6) in the Byte field on the PACS row of the Filtering box.
Figure 8 – HID iCLASS PACS Filtering Card Data Manipulation Example
11. Open a text editor and place the iCLASS Sample card into the RFID field over the
antenna of the reader.
12. The Keyboard Wedge enters into the editor the text <pacs> followed by the filtered
PACS data in hexadecimal format followed by the text </pacs>.
Example:
<pacs>e1b500f9ff12e0</pacs>
Note the byte f6 (= 246) has been filtered out.