Karcher B 150 R - Manual (Page 14)

- 12
 Adjust the wiper flaps by turning the
adjustment wheel so that they
touch the floor.
 Turn the adjustment wheel an addi-
tional turn toward the bottom.
The hose with the spray nozzle is at-
tached to the back of the appliance. It
serves for washing away dirt and for
manual cleaning of the wastewater
tank.
 Turn programme selector switch to
"transport run".
 Press Info button.
 Turn the info button until "tank rins-
ing" is shown on the display.
 Press Info button.
 Turn the info button until "ON" is
displayed.
 Press Info button.
The water pump delivers fresh wa-
ter through the spray nozzle.
NOTICE
Overflow wastewater tank. When the
wastewater tank is full, the suction tur-
bine switches off and "Wastewater
tank full" is shown on the display.
ṇ WARNING
Please observe the local provisions re-
garding the wastewater treatment.
 Take the dirt water discharge hose
from the support and lower above a
suited collection device.
NOTICE
The wastewater flow can be controlled
by squeezing the dosing unit.
 Let off water by opening the dosage
device at the discharge hose.
 The rinse the dirt water reservoir
with clear water.
 Open the lock of the fresh water
reservoir.
 Drain the fresh water.
 Attach the closure of the fresh wa-
ter tank.
 Check the waste container. If need-
ed, remove and empty waste con-
tainer after work.
 Remove the Intelligent Key.
 Secure the machine with wheel
chocks to prevent it from rolling
away.
 Charge battery, if required.
 Plug in the Intelligent Key.
 Select the desired function by turn-
ing the Info button.
The different functions are described in
the following.
 Turn programme selector switch to
"transport run".
 Press Info button.
In the transport run menu the following
settings can be made:
In this menu item the authorisations for
yellow intelligent keys as well as the
language of the display texts are se-
lected.
 Turn the info button until "key man-
agem." is shown on the display.
 Press Info button.
 Remove the grey Intelligent Key
and insert the yellow Intelligent Key
to be programmed.
 Select the desired menu item to be
modified by turning the Info button.
 Press Info button.
 Adjust the menu item by turning the
Info button.
 Confirm the setting by pressing the
menu item.
 Select the next menu item to be
modified by turning the Info button.
 In order to save the authorisations,
call the "Save?" menu by turning
the info button and then press the
info button.
 "Continue key menu":
Yes: Programme further Intelligent
Key.
No: Exit key menu.
 Press Info button.
This function is required when chang-
ing the cleaning head.
 Turn the info button until "brush
head" is shown on the display.
 Press Info button.
 Turn the info button until the de-
sired brush shape is highlighted.
 Press Info button.
 Move the hoist drive for replace-
ment of the cleaning head by turn-
ing the info button:
up: Raise
down: Lower
OFF: Stop
 Exit menu: Select "OFF" by turning
the info button and press the info
button.
When exiting the menu, the control
performs a restart.
 Turn the info button until "stopping
times" is shown on the display.
 Press Info button.
 Turn the info button until the de-
sired assembly is highlighted.
 Press Info button.
 Turn the info button until the de-
sired stopping time is reached.
 Press Info button.
 Turn the info button until "Battery
menu" is displayed.
 Press Info button.
 Turn the info button until the de-
sired battery type is highlighted.
 Press Info button.
Changes of the parameters of the indi-
vidual cleaning programmes that were
made during the operation are reset to
the basic setting after switching off the
appliance.
 Turn the info button until "Basic set-
ting" is displayed.
 Press Info button.
 Turn the info button until the de-
sired cleaning programme is dis-
played.
 Press Info button.
 Turn the info button until the de-
sired parameter is displayed.
 Press Info button - the set value
blinks.
 Set the desired value by turning the
info button.
 Press Info button.
Adjust wiping flaps
Spray nozzle (option)
Emptying the Dirt Water Reser-
voir
Emptying the Fresh Water Tank
Empty waste container (only
with R cleaning head)
Shutting down
Grey Intelligent Key
Transport run
Key management
Selecting the brush shape
Stopping times
Setting the battery type
Standard setting
14 EN