Transport, Maintenance and care, Indicator lamp service will be illuminated – Karcher HDS 2000 SUPER User Manual

Page 26: Clean fuel tank, Check pump for leaks, Transport maintenance and care

Advertising
background image

– 10

Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
When transporting in vehicles, secure the
appliance according to the guidelines from
slipping and tipping over.

ƽ

Danger

Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.

Shut off water supply.

Set the appliance switch to "OFF".

Pull main plug out of socket with dry
hands only.

Remove water connection.

Activate hand spray gun until device is
pressure less.

Lock the trigger gun.

Allow device to cool down.

Your Kärcher vender will inform you
about the performance of a periodic
safety inspection resp. signing of a
maintenance contract.

The service indicator lamp is lit up when
certain maintenance jobs are necessary on
account of reaching a certain number of op-
erating hours.

Inform Customer Service

* To be done by Customer Service.

Remove the appliance hood, the handle
bow and the lid of the switch box.

Remove the tank.

Dispose off fuel residues according to
environment safety laws.

Rinse the tank thoroughly and let it dry.

Change fuel filter.

3 drops per minute are permitted and can
come out from the lower side of the appli-
ance.

With stronger leak, have device
checked by customer service.

Transport

Maintenance and care

Indicator lamp service will be

illuminated

Necessary maintenance jobs

Check high pressure connections for
leaks.

Clean fuel tank und fuel filter.

Check pump for leaks.

Change oil in the pump.

Clean the sieve in the water connec-
tion of both swimmer tanks.

Clean sieve in front of the water short-
age safe guard.

Remove the soot from the heating coil. *

Decalcify the heating coil. *

Clean/replace the ignition electrodes. *

Clean/replace the burner nozzle. *

Set the burner. *

Check overflow valve of the pump for
leaks. *

Check high pressure hose. *

Clean hand-spray gun.

Check pressure tank. *

Clean fuel tank.

Check pump for leaks

26

EN

Advertising
This manual is related to the following products: