Ayre Acoustics V-1x Power Amplifier - Manual (Page 5)

Installation and
Operation
The Ayre V-1x is easy to hook up and use. The following
guidelines will ensure that the installation goes smoothly.
Location
Do not stack the Ayre V-1x
directly with other components,
as this may restrict the air
flow or induce hum into the
audio circuitry.
The Ayre V-1x produces a moderate amount of heat during
operation.
It is important to maintain an adequate supply
of air flow to avoid overheating the amplifier .
Good locations for your amplifier are on the floor, or in an
open-backed cabinet or rack. If the amplifier is placed in a
cabinet, be sure to provide at least three inches (75 mm) of
air space on all sides of the amplifier.
The receiver for the infrared remote control is mounted
behind the bottom recess on the amplifier’s front panel.
Although the transmitter’s beam will reflect off of most
wall surfaces, a direct line of sight from the listening
position will ensure the maximum range. The beam will
also travel through glass if necessary.
!
Page 3