Karcher BD 40-12 C Bp Pack User Manual

Quickstart, Start up, Operation

Advertising
background image

QUICKSTART

5.964-384.0 09/11

Warning

These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.

Start up

1

A

b

A

Unplug the charger from the mains.

B

Wind the mains cable around the cable hold-
ers.

2

A

b

C

A

Open the cover of the fresh water reservoir.

B

Insert the filling hose into the fill opening and
connect the other end to a water faucet.
Fill in fresh water (maximum 50 °C).
Add detergent. Follow dosing instructions for
detergent.

C

Close the cover of the fresh water reservoir.

3

A

b

C

A

Pull the lever for level adjustment.

B

Adjust the handle to the desired height.
Release the lever for level adjustment.

C

Set the water quantity at the regulating valve
according to the dirt level and the type of
flooring.

Operation

1

A

GB

b

E

C

Starting the machine

A

Switch on the button for brush operations.

B

Switch on "Detergent" button.

C

Press the switch of the suction turbine; the
vacuum process will start.

Note

Depending on the cleaning task, individual func-
tions can remained switched off.
Activated switches light up.
D

Pull the lever of the vacuum bar lowering up
and then press it down; the vacuum bar is
lowered.

Caution

Risk of damage to the floor covering. Do not op-
erate the appliance on the spot.
Risk of damage. Raise the suction bar before
backing up for extended periods of time.
E

Operate the handle switch - the brush drive
and the detergent applicator are switched on
(if set up).
Move the appliance forward over the surface
to be cleaned.

BD 40/12 C

Advertising