Document Outline

• <TABELLE>
  • <TABELLE>
    • <TABELLE>
      • <TABELLENHAUPTTEXT>
        • <TABELLENREIHE>
          • <GRAFIK>
            • <GRAFIK>
          • Warning
            • Warning
              • Warning
                • Warning
            • These are only brief instructions! Please read and comply with these instructions prior to using or servicing your appliance.
              • These are only brief instructions! Please read and comply with these instructions prior to using or servicing your appliance.
            • The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers for the operator and other persons.
• <TABELLE>
  • <TABELLE>
    • <TABELLE>
      • <TABELLENKOPFZEILE>
        • <TABELLENREIHE>
          • Start up
            • Start up
              • Start up
      • <TABELLENHAUPTTEXT>
        • <TABELLENREIHE>
          • 1
            • 1
              • 1
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
              • B
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • A Unplug the charger from the mains.
            • A Unplug the charger from the mains.
              • A Unplug the charger from the mains.
                • A Unplug the charger from the mains.
              • B Place the mains cable into the storage compartment.
                • B Place the mains cable into the storage compartment.
        • <TABELLENREIHE>
          • 2
            • 2
              • 2
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
            • B
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • A Open the cover of the fresh water reservoir.
            • A Open the cover of the fresh water reservoir.
              • A Open the cover of the fresh water reservoir.
                • A Open the cover of the fresh water reservoir.
                • Fill in fresh water (maximum 60 °C). Leave sufficient space for the detergent.
                • Close the cover of the fresh water reservoir.
              • or
              • B Connect the hose to the automatic filling system and open the water supply (max. 60°C).
                • B Connect the hose to the automatic filling system and open the water supply (max. 60°C).
                • Monitor the appliance - the automatic filling system will interrupt the water supply when the tank is full.
                • Shut off the water supply and disconnect the hose from the appliance.
        • <TABELLENREIHE>
          • 3
            • 3
              • 3
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
              • B
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • A Pour in detergent.
            • A Pour in detergent.
              • A Pour in detergent.
                • A Pour in detergent.
              • B Open fresh water valve.
                • B Open fresh water valve.
• <TABELLE>
  • <TABELLE>
    • <TABELLE>
      • <TABELLENKOPFZEILE>
        • <TABELLENREIHE>
          • Operation
            • Operation
              • Operation
      • <TABELLENHAUPTTEXT>
        • <TABELLENREIHE>
          • 1
            • 1
              • 1
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
            • C
              • C
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
              • B
            • <GRAFIK>
              • <GRAFIK>
          • Starting the machine
            • Starting the machine
            • A Step on the standing platform.
              • A Step on the standing platform.
                • A Step on the standing platform.
                • Do not press the accelerator pedal.
              • B Release emergency-stop button by turning.
                • B Release emergency-stop button by turning.
              • C Set main switch to “1”.
                • C Set main switch to “1”.
        • <TABELLENREIHE>
          • 2
            • 2
              • 2
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
            • C
              • C
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • Drive forward
            • Drive forward
            • A Set the forward drive direction using the drive direction button at the operator console.
              • A Set the forward drive direction using the drive direction button at the operator console.
                • A Set the forward drive direction using the drive direction button at the operator console.
              • B Set the speed range on the programme selection switch.
                • B Set the speed range on the programme selection switch.
              • C Press accelerator pedal down slowly.
                • C Press accelerator pedal down slowly.
                • Release the accelerator pedal, the machine brakes automatically and stops.
        • <TABELLENREIHE>
          • 3
            • 3
              • 3
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
            • C
              • C
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • Reverse drive
            • Reverse drive
            • A Set the drive direction to backwards using the drive direction button at the operator console.
              • A Set the drive direction to backwards using the drive direction button at the operator console.
                • A Set the drive direction to backwards using the drive direction button at the operator console.
              • B Set the speed range on the programme selection switch.
                • B Set the speed range on the programme selection switch.
              • C Press accelerator pedal down slowly.
                • C Press accelerator pedal down slowly.
                • Release the accelerator pedal, the machine brakes automatically and stops.
        • <TABELLENREIHE>
          • 4
            • 4
              • 4
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
          • Scrubbing vacuum Eco mode
            • Scrubbing vacuum Eco mode
              • Scrubbing vacuum Eco mode
                • Scrubbing vacuum Eco mode
            • A Light cleaning intensity
              • A Light cleaning intensity
                • A Light cleaning intensity
                • Wet clean the floor and vacuum up dirt water.
        • <TABELLENREIHE>
          • 5
            • 5
              • 5
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • Scrubbing suction
            • Scrubbing suction
              • Scrubbing suction
                • Scrubbing suction
            • A High cleaning intensity
              • A High cleaning intensity
                • A High cleaning intensity
                • Wet clean the floor and vacuum up dirt water.
        • <TABELLENREIHE>
          • 6
            • 6
              • 6
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • Vacuuming
            • Vacuuming
            • A Suck in the dirt fleet.
              • A Suck in the dirt fleet.
                • A Suck in the dirt fleet.
        • <TABELLENREIHE>
          • 7
            • 7
              • 7
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • Apply detergent solution
            • Apply detergent solution
            • A Apply detergent solution to the severelyk contaminated surface and let it soak in.
              • A Apply detergent solution to the severelyk contaminated surface and let it soak in.
                • A Apply detergent solution to the severelyk contaminated surface and let it soak in.
• <TABELLE>
  • <TABELLE>
    • <TABELLE>
      • <TABELLENKOPFZEILE>
        • <TABELLENREIHE>
          • Finish operation
            • Finish operation
              • Finish operation
      • <TABELLENHAUPTTEXT>
        • <TABELLENREIHE>
          • 1
            • 1
              • 1
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
            • <GRAFIK>
              • <GRAFIK>
          • C
            • C
              • C
            • <GRAFIK>
              • <GRAFIK>
          • Turn off the appliance
            • Turn off the appliance
            • A Set programme switch to step 1 (driving).
              • A Set programme switch to step 1 (driving).
                • A Set programme switch to step 1 (driving).
              • B Turn key to "0" and remove it.
                • B Turn key to "0" and remove it.
              • C Press emergency-stop button.
                • C Press emergency-stop button.
        • <TABELLENREIHE>
          • 2
            • 2
              • 2
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • Turn off the water supply
            • Turn off the water supply
              • Turn off the water supply
                • Turn off the water supply
            • A Close the fresh water valve.
              • A Close the fresh water valve.
                • A Close the fresh water valve.
        • <TABELLENREIHE>
          • 3
            • 3
              • 3
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
            • <GRAFIK>
              • <GRAFIK>
          • Emptying the Dirt Water Reservoir
            • Emptying the Dirt Water Reservoir
            • n Warning
              • n Warning
                • n Warning
              • Please observe the local provisions regarding the wastewater treatment.
                • Please observe the local provisions regarding the wastewater treatment.
            • A Take the water discharge hose from the support and lower above a suited collection device.
              • A Take the water discharge hose from the support and lower above a suited collection device.
                • A Take the water discharge hose from the support and lower above a suited collection device.
              • B Then rinse the dirt water tank with clear water.
                • B Then rinse the dirt water tank with clear water.
• <TABELLE>
  • <TABELLE>
    • <TABELLE>
      • <TABELLENKOPFZEILE>
        • <TABELLENREIHE>
          • Maintenance and care
            • Maintenance and care
              • Maintenance and care
          • daily
            • daily
          • weekly
            • weekly
          • Kärcher Customer Service
            • Kärcher Customer Service
      • <TABELLENHAUPTTEXT>
        • <TABELLENREIHE>
          • 1
            • 1
              • 1
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
            • B
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • n Warning
            • n Warning
              • n Warning
                • n Warning
              • Please observe the local provisions regarding the wastewater treatment.
                • Please observe the local provisions regarding the wastewater treatment.
            • A Take the water discharge hose from the support and lower above a suited collection device.
              • A Take the water discharge hose from the support and lower above a suited collection device.
                • A Take the water discharge hose from the support and lower above a suited collection device.
              • B Then rinse the dirt water tank with clear water.
                • B Then rinse the dirt water tank with clear water.
        • <TABELLENREIHE>
          • 2
            • 2
              • 2
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • A Open the lock.
            • A Open the lock.
              • A Open the lock.
                • A Open the lock.
                • Swivel the top of the appliance forward.
                • Check and ensure that the top of the appliance is seated properly on the wastewater reservoir.
        • <TABELLENREIHE>
          • 3
            • 3
              • 3
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
          • A Check and clean the waste water reservoir sieve.
            • A Check and clean the waste water reservoir sieve.
              • A Check and clean the waste water reservoir sieve.
                • A Check and clean the waste water reservoir sieve.
        • <TABELLENREIHE>
          • 4
            • 4
              • 4
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
          • A Explanin the swimmer in the dirt water tank and its functioning.
            • A Explanin the swimmer in the dirt water tank and its functioning.
              • A Explanin the swimmer in the dirt water tank and its functioning.
                • A Explanin the swimmer in the dirt water tank and its functioning.
        • <TABELLENREIHE>
          • 5
            • 5
              • 5
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • BD model
            • BD model
            • A Check brush for wear and tear and clean it.
              • A Check brush for wear and tear and clean it.
                • A Check brush for wear and tear and clean it.
                • If the bristles are as long as the indicator bristles, they must be replaced.
            • BR model
            • A Check the brushes for wear (bristle length at least 10 mm), replace if required.
              • A Check the brushes for wear (bristle length at least 10 mm), replace if required.
                • A Check the brushes for wear (bristle length at least 10 mm), replace if required.
                • Check brushes for wear and tear, clean.
        • <TABELLENREIHE>
          • 6
            • 6
              • 6
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
            • <GRAFIK>
              • <GRAFIK>
          • A Clean vacuum lips in the vacuum bar and check for wear.
            • A Clean vacuum lips in the vacuum bar and check for wear.
              • A Clean vacuum lips in the vacuum bar and check for wear.
                • A Clean vacuum lips in the vacuum bar and check for wear.
              • B Clean the suction channel.
                • B Clean the suction channel.
        • <TABELLENREIHE>
          • 7
            • 7
              • 7
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • A Clean the outside of the appliance with a damp cloth which has been soaked in mild detergent.
            • A Clean the outside of the appliance with a damp cloth which has been soaked in mild detergent.
              • A Clean the outside of the appliance with a damp cloth which has been soaked in mild detergent.
                • A Clean the outside of the appliance with a damp cloth which has been soaked in mild detergent.
        • <TABELLENREIHE>
          • 8
            • 8
              • 8
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • A Charge battery.
            • A Charge battery.
              • A Charge battery.
                • A Charge battery.
        • <TABELLENREIHE>
          • 9
            • 9
              • 9
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • A Maintenance to be carried out every 200 operating hours
            • A Maintenance to be carried out every 200 operating hours
              • A Maintenance to be carried out every 200 operating hours
                • A Maintenance to be carried out every 200 operating hours
• <TABELLE>
  • <TABELLE>
    • <TABELLE>
      • <TABELLENKOPFZEILE>
        • <TABELLENREIHE>
          • Troubleshooting
            • Troubleshooting
              • Troubleshooting
      • <TABELLENHAUPTTEXT>
        • <TABELLENREIHE>
          • 1
            • 1
              • 1
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
            • D
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
            • <GRAFIK>
              • <GRAFIK>
            • E
              • E
            • <GRAFIK>
              • <GRAFIK>
          • C
            • C
              • C
            • <GRAFIK>
              • <GRAFIK>
            • F
              • F
            • <GRAFIK>
              • <GRAFIK>
          • Appliance cannot be started
            • Appliance cannot be started
            • A Step on the standing platform.
              • A Step on the standing platform.
                • A Step on the standing platform.
                • Do not press the accelerator pedal.
              • B Release emergency-stop button by turning.
                • B Release emergency-stop button by turning.
              • C Set main switch to “1”.
                • C Set main switch to “1”.
              • D Unplug the charger from the mains.
                • D Unplug the charger from the mains.
              • E Battery depleted.
                • E Battery depleted.
                • Charge battery.
              • F Close the solenoid brake. To do this, press the lever of the solenoid brake all the way up to the stop.
                • F Close the solenoid brake. To do this, press the lever of the solenoid brake all the way up to the stop.
        • <TABELLENREIHE>
          • 2
            • 2
              • 2
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
            • B
              • B
            • <GRAFIK>
              • <GRAFIK>
            • <GRAFIK>
            • <GRAFIK>
              • <GRAFIK>
            • C
              • C
            • <GRAFIK>
              • <GRAFIK>
          • Device does not drive or drives only slowly
            • Device does not drive or drives only slowly
            • A Release accelerator pedal, turn the key switch to "0", turn the key switch to "1", press the accelerator pedal.
              • A Release accelerator pedal, turn the key switch to "0", turn the key switch to "1", press the accelerator pedal.
                • A Release accelerator pedal, turn the key switch to "0", turn the key switch to "1", press the accelerator pedal.
              • B Reset fuse of control system.
                • B Reset fuse of control system.
              • C Battery depleted.
                • C Battery depleted.
                • Charge battery.
        • <TABELLENREIHE>
          • 3
            • 3
              • 3
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
            • D
              • D
            • <GRAFIK>
              • <GRAFIK>
            • G
              • G
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
              • B
            • <GRAFIK>
              • <GRAFIK>
            • E
              • E
            • <GRAFIK>
              • <GRAFIK>
          • C
            • C
              • C
            • <GRAFIK>
              • <GRAFIK>
            • F
              • F
            • <GRAFIK>
              • <GRAFIK>
          • No or inadequate suction power
            • No or inadequate suction power
            • A Empty the dirt water reservoir.
              • A Empty the dirt water reservoir.
                • A Empty the dirt water reservoir.
              • B Reset fuse of suction turbine.
                • B Reset fuse of suction turbine.
              • C Clean the seals between dirt water reservoir and top of the appliance and check for leaks, replace if required.
                • C Clean the seals between dirt water reservoir and top of the appliance and check for leaks, replace if required.
              • D Clean the vacuum lips on the vacuum bar, turn or replace if required
                • D Clean the vacuum lips on the vacuum bar, turn or replace if required
              • E Check suction hose for blockages; clean if required.
                • E Check suction hose for blockages; clean if required.
                • Check connection between suction hose and suction bar and suction hose and wastewater tank.
              • F Clean the floater in the dirt water tank.
                • F Clean the floater in the dirt water tank.
              • G Check and clean the waste water reservoir sieve.
                • G Check and clean the waste water reservoir sieve.
        • <TABELLENREIHE>
          • 4
            • 4
              • 4
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
          • The battery indicator blinks
            • The battery indicator blinks
            • A Charge battery.
              • A Charge battery.
                • A Charge battery.
        • <TABELLENREIHE>
          • 5
            • 5
              • 5
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
          • A
            • A
              • A
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
            • <GRAFIK>
              • <GRAFIK>
          • Insufficient cleaning result
            • Insufficient cleaning result
            • BD model
            • A Check brush for wear and tear and clean it.
              • A Check brush for wear and tear and clean it.
                • A Check brush for wear and tear and clean it.
                • If the bristles are as long as the indicator bristles, they must be replaced.
            • BR model
            • A Check the brushes for wear (bristle length at least 10 mm), replace if required.
              • A Check the brushes for wear (bristle length at least 10 mm), replace if required.
                • A Check the brushes for wear (bristle length at least 10 mm), replace if required.
                • Check brushes for wear and tear, clean.
              • B Charge battery.
                • B Charge battery.
        • <TABELLENREIHE>
          • 6
            • 6
              • 6
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
              • B
            • <GRAFIK>
              • <GRAFIK>
          • Brushes do not turn
            • Brushes do not turn
            • A Reset fuse of brush drive.
              • A Reset fuse of brush drive.
                • A Reset fuse of brush drive.
              • B Charge battery.
                • B Charge battery.
        • <TABELLENREIHE>
          • 7
            • 7
              • 7
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • B
            • B
            • <GRAFIK>
              • <GRAFIK>
          • No or very little detergent solution gets added
            • No or very little detergent solution gets added
            • A Check level of detergent solution in the fresh water tank; refill, if required.
              • A Check level of detergent solution in the fresh water tank; refill, if required.
                • A Check level of detergent solution in the fresh water tank; refill, if required.
              • B Open fresh water valve.
                • B Open fresh water valve.
        • <TABELLENREIHE>
          • 8
            • 8
              • 8
          • A
            • A
            • <GRAFIK>
              • <GRAFIK>
          • The cleaning head is not lowered.
            • The cleaning head is not lowered.
            • A Reset fuse of control system.
              • A Reset fuse of control system.
                • A Reset fuse of control system.