Alpine TDA-7553E - Manual (Page 39)

39
English
CD Shuttle Operation
or
TITLE
A
ALPINE
ALPINE_ _
5
Titling Disc (Continued)
Press the Audio Control button to store the first
character. The first character will stop blinking
and the display will automatically advance to
the next character. When that character begins
to blink, you may choose the next letter or
symbol of your title.
6
7
Press and hold the TITLE button for at least 3
seconds to record the title.
Notes:
•
When the memory capacity for the disc
titles is used up, the display shows "FULL
DATA" to indicate that no more title can be
memorized. Refer to the Owner's Manual of
the CD shuttle interconnected for informa-
tion about how many discs you can title.
•
The CD titles stored in memory will be
erased when the Ai-NET cable to the CD
Shuttle is disconnected.
5
7
Repeat steps 4 and 5 above to complete the title.
All 8 character positions should be filled (use
spaces to fill remaining positions for titles less
than 8 characters).