American Audio Tri Pack Live User Manual
Page 6
Subwoofer Rear Panel:
1. RIGHT SPEAKON CONNECTION – The subwoofer includes a pair of Speakon type connec-
tions. The Speakon connectors have a pin 1+ (hot) and 1- (ground) configuration, pins 2+ and
2- are not used. For more wiring information regarding the Speakon connectors see page 12.
2. RIGHT BALANCED XLR LINE INPUT – This connection is designed to accept a balanced line
input signal from a mixer or other line level device with a balanced output jack. Use a balanced
cable when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be
sure to connect only line level input devices such as mixers and tape machines to this jack.
3. LEFT BALANCED XLR LINE INPUT – This connection is designed to accept a balanced line
input signal from a mixer or other line level device with a balanced output jack. Use a balanced
cable when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be
sure to connect only line level input devices such as mixers and tape machines to this jack.
4. MICROPHONE – This combo jack will accept a standard 1/4 plug or XLR 3-pin balanced
male plug. The volume output level for this microphone will be controlled by GAIN MIC knob
(11).
5. AUX INPUT - CD players, Tape Decks and other line level instruments may only be con-
nected to these jacks. The red colored RCA jack represents the right channel input and the
white represents the left channel input. Input volume will be controlled by the GAIN AUX
knob.
Tri Pack Live
Controls and Features
©
American Audio
®
- www.americanaudio.us - Tri Pack Live - Instruction Manual Page 6
1
2
11
10
9
8
7
6
5
4
3
18
17
16
15 14 13
12