Karcher B 60 W Bp Pack - Manual (Page 34)

– 12
 Lift the cleaning head.
 Loosen the lock of the wiper flap.
 Push the bearing lid down and remove.
 Pull out the brush roller.
 Insert a new brush roller.
 Reassemble the bearing lid in the re-
verse sequence.
 Repeat process on the opposite side.
 Lift the cleaning head.
 Press the pedal for changing the brush-
es downward beyond its resistance.
 Pull the disc brush out of the side below
the cleaning head.
 Hold the new disc brush under the
cleaning head, push upward and lock.
 Loosen both screws.
 Move both the drawing springs in the
desired position.
 Align the splash guard.
 Tighten both the screws.
 Release the screw for locking the tank
and swing up the tank.
 R cleaning head: Unscrew the star han-
dle and remove the lid.
 D cleaning head: Remove the lid of the
cleaning head.
 Place the cleaning head halfway in front
of the appliance.
 Connect the power cord of the cleaning
head to the appliance (same colours
must meet).
 R cleaning head: Slide the lid in and
tighten the screw.
 D cleaning head: Replace the lid and
lock it.
 Connect the hose couplers on the
cleaning head to the hose on the appli-
ance.
Replacing the brush rollers
Replacing the Disk Brushes
Mount splash guard
Install cleaning head
34 EN