ATI Technologies RADEON 7000 - Manual (Page 34)

30
Starting Windows
®
with TV Display Enabled
The TV screen may become scrambled during the
initial Windows
®
logo display. This is only a
temporary effect and your screen will be restored
within a few seconds.
During start up, your RADEON™ 7000 64MB AGP
will go through a sequence of mode settings, during
which your TV display will remain blank. This
process takes only a few seconds and helps program
the TV display.
Using SCART Connectors for European TVs
The SCART connector supports only the Composite
video format, which means you will have to use an
S-Video-to-Composite Video Adapter Cable. The
above illustration shows how to connect your PC to a
European TV using the SCART.
If your European TV does support S-Video (S-VHS)
input, you should use an S-Video cable (available in
most consumer electronic stores) rather than the
SCART connector.
How To Enable/Disable The TV Display
1 Access the Windows
®
Control Panel. Double-
click Display.
2 Click on the Settings tab and then the
Advanced... button.
Audio In
(Right = red)
(Left = white)
SCART
CONNECTOR
Audio Cable
Video Adapter Cable
Connect to PC
Audio Out
Connect to PC
S-Video Out
Connect to
TV or VCR
Composite Video-In (yellow)