Sony CPF-NW001 User Manual

Page 2

Advertising
background image

2

GB

To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
To prevent fire or shock hazard, do not place objects filled
with liquids, such as vases, on the apparatus.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, table-cloths, curtains, etc. And
don’t place lighted candles on the apparatus.

Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.

The nameplate is located on the bottom exterior.

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries
according to the manufacturer’s instructions.

Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.

Notice for the customers in the United Kingdom
A moulded plug complying with BS1363 is fitted to this
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a
fuse of the same rating as the supplied one and approved by
ASTA or BSI to BS1362, (i.e., marked with

or

mark) must be used.
If the plug supplied with this equipment has a detachable
fuse cover, be sure to attach the fuse cover after you change
the fuse. Never use the plug without the fuse cover.
If you should lose the fuse cover, please contact your
nearest Sony service station.

Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)

This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will

help to conserve natural resources. For more detailed
information about recycling of this product, please contact
your local Civic Office, your household waste disposal
service or the shop where you purchased the product.

• “WALKMAN” and “WALKMAN” logo are registered

trademarks of Sony Corporation.

• All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective
holders. In this manual, ™ and

®

marks are not specified.

Precautions

On safety

• AC power cord must be changed only at the qualified

service shop.

• Use only the supplied subwoofer. Do not use any

other AC power adaptor.

On placement

• Do not place the system in an inclined position.

• Do not place the system in locations that are hot and

subject to direct sunlight, dusty, very humid, or
extremely cold.

• Use caution when placing the unit or subwoofer on a

specially treated (waxed, oiled, polished, etc.) floor,
as staining or discoloration may result.

On cleaning

Clean the cabinets with a soft cloth lightly moistened
with a mild detergent solution or water. Do not use any
type of abrasive pad, scouring powder or solvent such
as alcohol or benzene.

Table of Contents

Checking Supplied Items ...............................3

Installation .....................................................4

Listening to Music .........................................6

Troubleshooting .............................................9

Specifications .................................................9

WARNING

Compatible “Walkman” models

See the following URLs for compatible “Walkman”
models.

USA: http://www.sony.com/walkmansupport/

Canada: http://www.sony.ca/ElectronicsSupport/

Europe: http://www.sonydigital-link.com/DNA/

China: http://service.sony.com.cn/KB/

Taiwan: http://www.twsupport.css.ap.sony.com/

Korea: http://scs.sony.co.kr/walkman/

Other countries or areas: http://www.css.ap.sony.com/

Polarity of the plug

Advertising