Sony CDX-GS500R User Manual

Page 27

Advertising
background image

27

ERROR
 The disc is dirty or inserted upside down.

– Clean or insert the disc correctly.

 A blank disc has been inserted.
 The disc cannot play due to a problem.

– Insert another disc.

 USB device was not automatically recognized.

– Connect it again.

 Press  to remove the disc.

FAILURE
 The connection of speakers/amplifiers is

incorrect.
– See the installation/connections manual of

this model to check the connection.

HUB NO SUPRT

(Hubs Not Supported)

 USB hub is not supported on this unit.

NO AF

(No Alternative Frequencies)

 There is no alternative frequency for the

current station.
– Press

 +/– while the program service

name is flashing. The unit starts searching
for another frequency with the same PI
(Program Identification) data (“PI SEEK”
appears).

NO DEV

(No Device)

 “USB” is selected as source without a USB

device connected. A USB device or a USB cable
has been disconnected during playback.
– Be sure to connect a USB device and USB

cable.

NO DISC
 The disc is ejected, or “CD” is selected as the

source without inserting the disc.

NO MUSIC
 The disc or USB device does not contain a

music file.
– Insert a music CD in this unit.
– Connect a USB device with a music file in it.

NO NAME
 A disc/album/artist/track name is not written

in the track.

NO TP

(No Traffic Programs)

 The unit will continue searching for available

TP stations.

NOT FOUND
 There is no item beginning with the selected

letter in Alphabet search.

OFFSET
 There may be an internal malfunction.

– Check the connection. If the error indication

remains on in the display, consult your
nearest Sony dealer.

OVERLOAD
 USB device is overloaded.

– Disconnect the USB device, then change the

source by pressing

.

– Indicates that the USB device is out of order,

or an unsupported device is connected.

PUSH EJT

(Push Eject)

 The disc cannot be ejected.

– Press

 (eject) (page 5).

READ
 The unit is reading all track and album

information on the disc.
– Wait until reading is complete and playback

starts automatically. Depending on the disc
structure, it may take more than a minute.

USB NO SUPRT

(USB Not Supported)

 The connected USB device is not supported.

– For details on the compatibility of your USB

device, visit the support site.

” or “

 During reverse or fast-forward, you have

reached the beginning or the end of the disc
and you cannot go any further.

 The character cannot be displayed with the

unit.

For App Remote:

APP --------

(Application)

 Connection with the application is not made.

– Establish iPhone connection again.

APP MENU

(Application Menu)

 Button operation cannot be performed while a

menu on iPhone is open.
– Exit the menu on iPhone.

Advertising