Axis Communications AXIS 1440 - Manual (Page 9)

Setting Up Macintosh Computers
Before you begin, the network (AT) version of your EPSON printer
driver must be installed on your Macintosh computer. You can
download your printer driver from
EPSON ’s Home Page at
http://www.epson.com.
Follow these steps to set up a Macintosh computer:
1. Open the Chooser window.
2. Select your EPSON printer icon.
3. If your network has more than one zone, click on the zone you
want. (If your network has no zones, this box doesn’t appear).
The default AXIS 1440 printer name appears in the right-hand
frame. The printer name is shown as: AXIS<nnnnnn>_<port>,
where <nnnnnn> is the last six digits of the AXIS 1440 serial
number, and <port> is LPT1 (for example,
AXIS100086_LPT1).
4. Click the printer name. By doing so you will detect if the AXIS
1440 is correctly connected to the printer.
5. Use the radio buttons to enable or disable background printing.
6. Close the Chooser.
Repeat this procedure for each Macintosh on the network using the
AXIS 1440.
Configuration and Management
The AXIS 1440 provides several tools for print server configuration
and management.
Important!
❏ If you’re not responsible for network administration, make sure
you consult your network administrator before you make any
configuration changes.
AXIS 1440 internal web pages
If your network supports TCP/IP, you can use any standard web
browser to access the AXIS 1440 internal web pages, which are
stored in the print server’s memory. The URL is the IP address you
assigned the print server (for example, http://192.36.254.101), or
the optional host name. From the AXIS 1440’s internal home page,
you can access configuration, management, status, account, printer,
and help services.
A Ap pp plle e
E EtherTalk