Sony KDL-40R453B - Manual (Page 5)

− 5 (GB) −
GB
Installing the TV onto the
wall
Installation procedure differs, depending on
your TV.
Use the Wall-Mount Bracket SU-WL450 to
install the TV to the wall.
Note
 If the Table-Top Stand is attached to the TV, detach the
Table-Top Stand beforehand. See the Quick Start Guide
and follow in reverse order the steps to attach the
Table-Top Stand.
 Place the TV with its screen facing down on a level and
stable surface covered with a thick and soft cloth, when
securing the Attachment parts for Wall-Mount Bracket or
when removing the Table-Top Stand from the TV to
prevent damaging the surface of the LCD display.
 Be sure to store the removed screws in a safe place,
keeping them away from children.
Preparing for installation
 Have the TV’s Reference Guide at hand
before installation.
 Be sure to have a Phillips screwdriver that
fits the screws prior to the assembly.
 Confirm the installing position of your TV.
 Prepare four or more screws of 8 mm
diameter and one screw of 5 mm or
equivalent (not supplied). Select screws
suitable for the material of the wall.
Checking the parts
Supplied with SU-WL450
 Verify that all the parts are included.
 Base (20) (1)  Pulley (2)
 PSW 6x20 (4)  PSW 4x20 with
Bush (2)
 Spacer (20) (2)  Belt (1)
 Bush (20) (M4) (2)  PSW 4x20 (2)
 Base Adaptor (2)  PSW 4x10 (8)
 Spacer (60) (2)  PSW 6x50 (2)
 Bush (M4) (2)  PSW 4x50 (2)
 Wall-Mount
Attachment (S) (2)
 Spacer (2)
 Washer (1)  PSW 5x12 (1)
Supplied with the TV
 Cable holder (2)