Operation, General use, Locking and unlocking the system – Adder Technology X100 User Manual

Page 9: General.use locking.and.unlocking.the.system

Advertising
background image

wel

c

ome

c

ontent

s

inst

all

ation

&

op

era

tion

sp

ecial

c

onfigura

tion

fur

t

er

informa

tion



Operation

General use

In use, the X100 modules should be transparent - the system and its peripherals
should operate exactly as normal, the only difference being that they are now up
to 100 metres or more apart.
In some installations, you may see some ‘shadows’ to the right of high contrast
screen characters. This can be caused by an incorrectly selected sharpness setting
and it may be necessary to make adjustments to correct this. Please see

Video.

compensation.-.sharpness.and.brightness

in the ‘Special configuration’

section.

Locking and unlocking the system

In situations where the computer system (and its local CAM) can be locked away
the X100 modules offer a viable security system to deter unauthorised use. Once
a password has been set, a simple key sequence allows the system to be quickly
and securely detached from its peripherals. Only the correct password will
reconnect the remote and local modules.

To lock the system

1 First set a password. For further details, please refer to the

Password.

setting

section in the ‘Special configuration’ chapter.

2 Simultaneously press the currently configured hotkeys (by default,

and

) along with .

The screen will go blank and the three keyboard
indicators will begin alternately flashing between the
‘Num Lock’ and ‘Scroll Lock’, and ‘Caps Lock’. This
sequence indicates that a password is required.

To unlock the system

1 Enter the correct password and press

.

Note: Passwords are NOT case sensitive.
Note: If an invalid password has been entered and the keyboard indicators
are not flashing as described above, press

to clear the incorrect attempt.

2 If the correct password is entered, the screen will be restored and normal

operation can continue.

To enable the video
Simultaneously press the currently configured hotkeys (by default,

and

)

long with . This command will be required to restore the video if

and

along with is used when no password has been set.

To disable the video
Simultaneously, press the currently configured hotkeys (by default,

and

)

along with .

Num

Loc

k

Caps

Loc

k

Scroll

Loc

k

Advertising