Sony SU-PW3M - Manual (Page 13)

13
(GB)
Confirming the
completion of the
installation
Check the following points.
• Four upper hooks of the Mounting Rack are
firmly hooked onto the two anchor bars of
the Plate Unit.
• The lead and the cable are not twisted or
pinched.
• All the securing screws (+B6
×
L20, supplied)
are tightened.
WARNING
Incomplete installation may cause the product falling
and result in injury or product damage. Also, improper
placement of the mains lead, etc., may cause fire or
electric shock through a short circuit.
Be sure to confirm the completion of the installation for
safety.
Checking the operation
of the woofer speaker
This Wall-Mount Bracket is equipped with a
woofer speaker. After installing the Mounting
Rack (with the TV) onto the Plate Unit, turn on
the power switch of the TV and check if the
woofer speaker is operating properly. If the TV is
not installed on the Mounting Rack properly, no
sound will be heard from the woofer speaker.
Note
Depending on the environment where you install
the Wall-Mount Bracket, the woofer speaker may
produce a strong bass sound. If the bass sound is
too strong, adjust the sound quality to your
preference in woofer level setting from the TV's
menu option. See the instruction manual of the TV
for more details on adjusting the sound quality.
4
Right side
Screws
(+B6
× L20, supplied)