Projecting, Connecting the projector/projecting – Sony VPL-CX70 User Manual
Page 17
5
Projecting
Projecting
When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the plug,
not the cable itself.
Refer also to the instruction manual of the computer to be connected.
Connecting with a computer
Wired connection
1
Connect the AC power cord to a wall outlet and connect the computer and the projector.
2
Press the ?/1 (on/standby) key.
3
Turn on the computer connected to the projector.
4
Press the INPUT key to select the input source.
5
Set it to output the signal to only the external monitor.
Connecting the Projector/Projecting
Fn
Fx
F7
Power
INPUT
2
2
1
1
4
4
3
3
5
5
* VPL-CX76 only
or
Input A
Input B*
Video
S Video
+