Alliance Laundry Systems Stacked Clothes Dryer - Manual (Page 42)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
510975 40
Lint Filter
CLEAN THE LINT FILTER BEFORE DRYING
EACH LOAD. (Refer to Figure 28 for lint filter
location.) Cleaning the lint filter is important because
a layer or pad of lint on the filter will block the flow of
air through the dryer, thus reducing the efficiency of
the dryer. The clothes will take longer to dry and
energy will be wasted.
Figure 28
Motor Overload Protector
The motor overload protector stops the motor and
shuts the heat off automatically in the event of an
overload. After cooling, the overload protector will
reset itself. The dryer can be restarted by pressing the
PUSH-TO-START button. If the overload protector
cycles again, remove the dryer from use and call the
service person to correct the problem.
D608I
1 Lint Filter
D608I
1