Sony CPF-IX001 - Manual (Page 26)

26 GB
The sound skips.
• Sound skipping may occur in the following cases:
– When music is being recorded onto the server
– When the computer is running many
applications
– When the network status is crowded
– When multiple CPF-IX001 systems are
performing playback simultaneously
• When the computer and the wireless LAN router
are connected by a wireless connection, change it
to a wired connection.
• When the wireless LAN router and the CPF-
IX001 are connected by a wireless connection,
position the CPF-IX001 as close to the wireless
LAN router as possible.
Track names are not displayed.
• Some types of input characters cannot be
displayed by the CPF-IX001, even if they can be
registered and displayed on the server.
Operation commands take time.
• Depending on the condition of the server, it may
take a while until operation proceeds. For
example, when there is no response after pressing
m/M, keep pressing m/M for a while.
Afterwards, operation should begin.
Wireless connection does not work well.
• Check that the wireless settings (SSID, Security
mode, Key) match the settings of your wireless
LAN router.
• Check that your wireless LAN router uses the
latest firmware version. If it is not the latest
version, updating the firmware may improve the
communication quality. For details, refer to the
operation manual of your wireless LAN router.
Optional components
There is no sound.
• Refer to General items “There is no sound.” and
check the condition of the CPF-IX001.
• Connect the portable audio player properly
(page 24) while checking:
– if LINE IN cable connected properly.
– if LINE IN cable plug is firmly inserted all the
way.
• Turn on the connected portable audio player.
• Refer to the operating instructions supplied with
the connected portable audio player and start
playing.
The sound is distorted.
• Set the volume of the connected portable audio
player lower.
If the CPF-IX001 still does not
operate properly after performing
the above measures, reset the
CPF-IX001 as follows:
1
If the network unit is in the suspended mode,
press SUSPEND to start it up.
2
If play starts, press x to stop play.
3
Insert a fine-tipped object into the RESET
hole on the side of the network unit and
press in.
4
The network unit restarts.
The CPF-IX001 is reset to the factory settings.
You should set the settings you made.