American Standard 7401.000 - Manual

L33
© 2008 AS America Inc.
HERITAGE
TWO-HANDLE CENTERSET LAVATORY FAUCET
WITH GOOSENECK SPOUT
GENERAL DESCRIPTION:
Durable cast brass construction. Amarilis 1/4 turn washerless
ceramic disc valve cartridges. Brass spout. One-half inch male
inlet shanks with brass coupling nuts and shank nuts. All brass
drain body with 1-1/4" (32mm) tailpiece. 1.5 gpm/5.7L/min.
maximum flow rate.
PRODUCT FEATURES:
Pressure Compensating Aerator: Provides a constant water
flow of 1.5 gpm throughout the pressure range.
Solid Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
7401.000 Shown
MODEL NUMBER:
7400.000 Centerset Lavatory
Rigid gooseneck spout. 1.5 gpm pressure
compensating aerator. Less drain. Less pop-up hole.
Less handles.
7401.000 Centerset Lavatory
Rigid gooseneck spout. 1.5 gpm pressure
compensating aerator. Pop-up drain. Less handles
.
7402.000 Centerset Lavatory
Rigid gooseneck spout. 1.5 gpm pressure
compensating aerator. Grid strainer drain.
Less handles.
Handles must be ordered separately.
7400.000
Product
Number
Description
Finish
7401.000
7402.000
Polished
Chrome
002
Handles must be ordered separately.
SUGGESTED SPECIFICATION:
4" centerset lavatory faucet shall be cast brass construction with all brass shank nuts and coupling nuts. Shall feature
water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Shall also feature 1/4 turn washerless ceramic disc
valve cartridges. Fitting shall be American Standard Model # 740_.000.___ and handle kit # 0000.___.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Meets the American Disabilities Act Guidelines and ANSI
A117.1 Requirements for the physically challenged.
Wrist
Blade Lever
172H
172V 142H
142V
140mm
(5-1/2)
22mm
(7/8) DIA.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
51mm
(2)
35mm
(1-3/8)
MAX.
32mm
(1-1/4)DIA.
MOUNTING
HOLES
102mm
(4)
127mm
(5)
135mm
(5-5/16)
51mm
(2)
235mm
(9-1/4)
The above fittings will accept the following Amarilis-Series handles.
Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating
aerator. Pop-up drain. Less handles.
Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator.
Grid strainer drain. Less handles.
Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator.
Less drain. Less handles.
Other Aerators Available:
Part Suffix
V15
L15
LV15
V05 Description
1.5 gpm Pressure Compensating Vandal-Resistant Aerator
1.5 gpm Pressure Compensating Laminar Flow
1.5 gpm Pressure Compensating Vandal-Resistant Laminar Flow Outlet
0.5 gpm Pressure Compensating Vandal-Resistant Spray
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
100 80 60 40 20