AIPTEK P8 - Manual (Page 8)

User’s Manual
www.aiptek.eu Page 4
EN
Power on/off your photo frame
To power on the photo frame, please press the Power button for 2
seconds. To power off the photo frame, please press the Power
button again.
Charging the battery
The internal battery of the device may not be fully charged when you use the photo frame
for the first time. You can charge the battery in the following two ways:
● Plug the AC power adapter into the DC-IN jack of the device, and connect the other
end to the power source.
● Connect the small end of the supplied USB cable to the USB port of the device, and
the large end to a powered PC. Make sure the photo frame is powered off.
Charging Status Charging Time
Power OFF, charging by AC power adapter around 2 hours
Power OFF, charging by USB connection around 12 hours
Setting up language
1. On the Main Menu, select the SETUP item and press OK ( ) to configure the basic
setup of your 3D Digital Photo Frame.
2. Move the Menu Navigation up or down to choose the desired language and press
OK ( ) to confirm.