Samsung SC-D23-XAP User Manual
Page 80
76
76
ENGLISH
IEEE 1394 Data Transfer
●
System requirements
■
CPU : faster Intel
®
Pentium III™ 450Mhz compatible.
■
Operating system : Windows
®
98SE, ME, XP, Mac OS (9.1~10.2)
■
Main memory : more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
■
Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
■
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■
If you want to pause recording momentarily,
press the START/STOP button again.
6. To stop recording, press the
(STOP) button.
Notes
■
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
■
Operations are not guaranteed for all of the recommended computer environments mentioned above.
V
.L
IG
H
T
D
IS
P
L
A
Y
P
B
Z
O
O
M
00616B SCD23-SEA(59~103) 5/12/03 9:53 AM Page 76