Sony WLA-NWB1 - Manual (Page 4)

WLA-NWB1 [GB] 2-895-766-12(1)
 GB
WLA-NWB1 [GB] 2-895-766-12(1)
Features
This unit is an audio transmitter using Bluetooth

technology.
You can enjoy music wirelessly by transmitting the audio signals
to a Bluetooth receiving device (headset, car stereo, speaker, stereo
component system, etc.)*1, if you connect this unit to the Walkman
with the WM-PORT*2 (22 pin).
*1 Bluetooth receiving devices are required to support A2DP (Advanced Audio
Distribution Profile).
*2 WM-PORT is a dedicated multiple connector for connecting accessories to your
Walkman.
This unit’s features are as follows:

Audio transmission using Bluetooth wireless technology.

Can be used with any Walkman with a WM-PORT (22 pin).

AVRCP (Audio/Video Remote Control Profile) supported
– Allows basic operation of a Walkman by Bluetooth headsets*3, etc.
– Allows volume control (+/-) operation of Bluetooth speakers*4, etc., by a
Walkman.
*3 AVRCP compatibility required
*4 AVRCP (Vol +/-) compatibility required

No need to charge; receives power from Walkman.
Walkman with
WM-PORT (22 pin)
This unit
Bluetooth headset, etc.
 Tip
For details on Bluetooth technology, see page 14.
For details on available Bluetooth devices, visit the following web sites:
USA: http://www.sony.com/walkmansupport/
Canada: http://www.sony.ca/ElectronicsSupport/
Europe: http://www.sonydigital-link.com/DNA/
China: http://service.sony.com.cn/KB/
Taiwan: http://www.twsupport.css.ap.sony.com/
Korea: http://scs.sony.co.kr/walkman/
Other countries or areas: http://www.css.ap.sony.com/