ADS Technologies SNA6500 - Manual (Page 31)

EN
31
Routing
These pages define routing related parameters, including static routes and RIP
(Routing Information Protocol) parameters.
Static route parameter
1
Click ‘Add’ to add a new static route to the list.
2 Click ‘Save Settings’ to save the configuration.
RIP parameter
RIP sends routing-update messages at regular intervals and when the network
topology changes. When a router receives a routing update that includes changes to
an entry, it updates its routing table to reflect the new route. RIP routers maintain
only the best route to a destination.
After updating its routing table, the router immediately begins transmitting routing
updates to inform other network routers of the change.
Routing table