Sony XAV-63 - Manual (Page 49)

49
Item Option Purpose Unit status
Rear/Sub Out
Switches the audio output
between the rear speakers and
subwoofer.
Rear To output audio signals to
the rear speakers
(amplifier).
No source
selected
Sub (z) To output audio signals to
the subwoofer.
RBE (Rear Bass Enhancer)
(page 42)
Uses rear speakers like
subwoofers.
OFF (z),
RBE1, RBE2,
RBE3 To select the mode.
During reception/
playback
Crossover Filter
Selects the cut-off frequency
of the front/rear speakers
(HPF) and subwoofer (LPF).
LPF: 50 Hz,
60 Hz, 80 Hz,
100 Hz (z),
120 Hz To select the cut-off
frequency. (Available only
when “Subwoofer” is set to
“ON.”)
During reception/
playback
HPF: OFF (z) To not cut out the
frequencies.
HPF: 50 Hz,
60 Hz, 80 Hz,
100 Hz, 120 Hz To select the cut-off
frequency.
Subwoofer
Phase:
Normal (z),
Reverse To select the subwoofer
phase. (Available only
when “Subwoofer” is set to
“ON.”)
4.1ch Speaker Level
(page 42) – – No source
selected