Alpine TME-M740BT - Manual (Page 9)

7
-EN
01GB05TMEM860_US_EN.fm
ALPINE TME-M740BT_US (EN)
Connect a Mobile Phone
If a mobile phone is connected for the first time, register a mobile phone
by doing the following.
• The Bluetooth setting is required for a mobile phone. See the
Owner’s Manual of the mobile phone.
• To input a pass code in the mobile phone, see the Owner’s Manual of
the mobile phone.
• Perform the operations observing the screen of the mobile phone
until the connection has completed.
• If ON is set in “Setting a Connection automatically (AUTO
CONNECT)” (page 13), automatic connection of the previously
connected mobile phone will start when power is turned on.
• If you previously registered a mobile phone in the unit, select the
mobile phone you want from the registration device setting list. Refer
to “Setting the registered Bluetooth Device (PAIRED DEVICE)”
(page 12).
Receiving a Call
When a call is received, a received call sound rings, and the received
call is announced in the display.
Touch [ ].
The call starts.
• If ON is set in “Receiving a Received Call automatically (AUTO
ANSWER)” (page 13), an incoming call is answered automatically 5
seconds after it is received.
• You can set whether full-screen is displayed while a call is placed.
For details, refer to “Setting the Screen to be Displayed while
Calling (CALLING DISPLAY)” (page 10).
Hanging up
Touch [ ].
The call finishes.
Placing a Call
1
Touch [MOBILE PHONE] on the SOURCE SELECT
screen.
The MOBILE PHONE screen is displayed.
2
Select the desired method.
Bluetooth Setting
Refer to “Setting the Bluetooth Connection (Bluetooth)”
(page 12).
Refer to “Sending Name Information of the Unit (VISIBLE
MODE)” (page 13).
➧
Searching for a Mobile Phone
Refer to “Searching for Connectable Bluetooth Device
(Bluetooth Search) (SEARCH DEVICE)” (page 12).
➧
➧
Inputting a pass code
Input a 4-digit to 10-digit number.
* When a pass code is input, enter the number within 30 seconds
to ensure security.
➧
Input a pass code on the Mobile Phone.
Input the same pass code number (4-digit to 10-digit) as the
unit.
* When a pass code is input, enter the number within 30 seconds
to ensure security
Registration is complete.
➧
Selection for a Mobile Phone
Touch [PAIR] of the mobile phone to be registered.
Registration
➧
Connection for a Mobile Phone
Refer to “Setting the registered Bluetooth Device (PAIRED
DEVICE)” (page 12).
➧
Selection for a Mobile Phone
Touch [CONNECT] of the mobile phone to be registered.
➧
The connection is made.
Connection
01GB00TMEM860_US_EN.book Page 7 Wednesday, December 13, 2006 2:23 AM