Asus Xeon 5U Rackmount Server AP1720-E1 - Manual (Page 28)

Chapter 2: Hardware setup 2-12
Before you can install a 5.25-inch drive, you should first remove the
front panel assembly (front bezel and front panel cover). The front
panel assembly is attached to the chassis through four hooked tabs
on the left side and four hinge-like tabs on the right side.
To remove the front panel assembly:
1. Press the lock lever (blue bar) on the
front edge of the chassis to release the
front panel assembly.
2.5 Front panel assembly
2.5.1 Removing the front panel assembly
2. Pull and swing the left edge of the front
panel outward.
Lock lever