Alpine CDA-9815RB - Manual (Page 15)

13
-EN
CD/MP3/WMA
To customers who use CDA-9815RB/CDA-9813R/CDA-
9812RX:
MP3/WMA can be played back on the built-in CD
Player of this unit.
To customers who use CDA-9811R:
MP3 can be played back if an MP3 compatible CD
changer is connected. However, WMA cannot be played
back.
Playback
1
Press c.
The movable display will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will begin.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER → CD → CD CHANGER* → TUNER
* Only when the CD changer is connected
c
-/J
g f
Rotary
encoder
SEARCH
6( )
8
9 4( ) 5( )
SOURCE/
POWER
3
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file):
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track (file) :
Press f.
Fast forward :
Press and hold f.
4
To pause playback, press -/J.
Pressing -/J again will resume playback.
5
To eject the disc, press c.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold c for at least 3 seconds
with the movable display open.
• The CD-player can play discs containing audio data, MP3 data
and WMA data.
• The MP3 indicator is lit during MP3 playback.
• The WMA indicator is lit during WMA playback.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• While playing back MP3/WMA, press 8 or 9 to move the folder
up or down.