Installation (hdmi-c5sw-r), 8 installation (hdmi-c5sw-r) – Avenview HDMI-C5SW-R User Manual
Page 8
www.avenview.com
8
1.8
Installation (HDMI-C5SW-R)
To setup Avenview HDMI-C5SW-R with SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 follow these steps for
connecting to a device:
1.
Connect all sources to HDMI Inputs on the 8X8 HDMI over CAT5 Matrix Switch (SW-HDMI-C5-8X8)
2.
Connect each DDC output on the SW-HDMI-C5-8X8 to respective DDC input on the remote receiver
HDMI-C5SW-R
3.
Connect each TMDS output on the SW-HDMI-C5-8X8 to respective TMDS input on the remote
receiver HDMI-C5SW-R
4.
Connect IR emitter cable to the SW-HDMI-C5-8X8 and direct the IR emitter to the build-in IR receiver
of the sources
5.
Connect the +5V 6A DC power supply to the SW-HDMI-C5-8X8
6.
Power on all HDMI sources
7.
Power on the SW-HDMI-C5-8X8
Please refer to SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 Matrix Switch user guides for details on how
to setup IR, Software.