Sony KDL-40W4710 - Manual (Page 37)

37 GB
Us
ing M
E
NU Fu
nctio
n
s
Features
USB Auto Start Automatically starts photo playback when the TV is turned on and a digital still
camera or other device storing photo files is connected to the USB port and then
turned on.
~
• Playback does not start automatically if the TV is turned on after connecting the
digital still camera or other device to the USB port.
Slideshow Select to view JPEG files as a slideshow.
Thumbnail View Select to view JPEG files as a thumbnail.
Off Select to disable this function.
Quick Start The TV turns on faster than usual within two hours after switching to standby
mode. However, power consumption in standby mode is 20 Watt higher than
usual.
Power Saving Selects the power saving mode to reduce the power consumption of the TV. When
“Picture Off” is selected, the picture is switched off and the
(Picture Off)
indicator on the TV front panel lights up in green. The sound remains unchanged.
Standard Power Default settings.
Reduced Power Reduces the power consumption of the TV.
Picture Off Switches off the picture. You can listen to the sound with the
picture off.
Light Sensor On Automatically optimises the picture settings according to the
ambient light in the room.
Off Turns off the “Light Sensor” feature.
~
• Be sure not to put anything over the sensor, as its function may be affected. See
page 14 for the location of the light sensor.
Logo Illumination Lights up and turns off the Sony logo on the front of the TV.
Motionflow Provides smoother picture movement and reduces picture blur.
High Provides smoother picture movement such as for film-based
contents.
Standard Provides smooth picture movement. Use this setting for
standard use.
Off Use this setting when the “High” and “Standard” settings
result in noise.
~
• Depending on the video, you may not see the effect visually, even if you have
changed the setting.
Film Mode Provides an improved picture quality which is optimised for film when playing
DVD images taken on film.
Auto 1/Auto 2 “Auto 1” provides smoother picture movement than the
original film-based content. “Auto 2” provides the original
film-based content as is.
Off Turns off the “Film Mode” feature.
~
• If the image contains irregular signals or too much noise, “Film Mode” will be
automatically turned off even if “Auto 1”/“Auto 2” is selected.
• “Film Mode” is not available when “Video/Photo” is set to “Photo” or when
photograph is detected if “Video-A” is set.
(Continued)