American Standard Washbrook FloWise 0.125 High Efficiency Urinal 6515.125 - Manual

M95
© 2008 AS America Inc.
WASHBROOK™ FloWise ® 0.125
HIGH EFFICIENCY URINAL
VITREOUS CHINA
WASHBROOK™ FloWise ® 0.125
HIGH EFFICIENCY URINAL
• Vitreous china
• High Efficiency (0.5 Lpf/0.125gpf)
• Flushing rim
• Elongated 14" rim from finished wall
• Washout flush action
• Extended sides for privacy
• 3/4" inlet spud
• Outlet connection threaded 2" inside (NPTF)
• 2 wall hangers
• Fixture only
• Meets ASME flush requirements at 0.125 gpf
❏ 6590.125 Top spud
❏ 6515.125 Back spud
Nominal Dimensions:
355 x 470 x 692mm
(14" x 18-1/2" x 27-1/4")
Recommended working pressure – between
20 psi at valve when flushing and 80 psi static
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
NOTES:
FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND
FACILITIES - CHECK LOCAL CODES.
When installed so top of rim is 387mm (15-1/4") from finished floor.
To Be Specified:
❏
Color: ❏ White ❏ Bone ❏ Silver ❏ Linen
❏ Black
❏
Flush Valve:
❏ American Standard Selectronic ™ #6063.013.002
DC Power (Top Spud)
BARRIER FREE
13mm
(1/2)
102mm
(4)
GASKET
2" N.P.T.
INSIDE THREADS
DETAIL OF OUTLET CONNECTION
FINISHED WALL
13mm
(1/2)
121mm
(4-3/4)
3/4
SPUD
3/4 S.P.S. OR 3/4 C.W.T.
SUPPLY TO FLUSH VALVE
438mm
(17-1/4)
692mm
(27-1/4)
REF.
457mm
(18)
292mm
(11-1/2)
89mm
(3-1/2)
102mm
(4)
470mm
(18-1/2)
343mm
(13-1/2)
C/L OF
OUTLET
K2 HANGERS
8mm X 25mm
(5/16 X 1)
SLOT
64mm
(2-1/2)
235mm
(9-1/4)
355mm
(14)
2" N.P.T.
FEMALE OUTLET
CONNECTION
13mm
(1/2)
FINISHED FLOOR
FINISHED
WALL
387mm
(15-1/4) MAX
610mm
(24)
OPTIONAL
Revised 11/08
ON H
OLD