Getting started, Getting started fm aerial hookups, Connecting a ground wire – Sony ST-SB920 User Manual

Page 5: Amplifier hookups, Mains lead hookup

Advertising
background image

5

GB

Getting Started

Getting Started

FM aerial hookups

With an FM outdoor aerial, you can obtain a higher FM
broadcast sound quality. We recommend that you use
the supplied FM wire aerial only temporarily until you
install an FM outdoor aerial. For the specific location
of the FM ANTENNA terminal, see the illustration
below.

FM ANTENNA

What will I need?

• FM wire aerial (supplied) (1)

• FM outdoor aerial (not supplied) (1) and 75-ohm coaxial

cable with IEC female type connector (not supplied) (1)

Connect the supplied FM wire aerial or an FM outdoor aerial
(not supplied) to the FM terminal on the back of this unit.

ANTENNA

FM

AM

y

75

COAXIAL

ANTENNA

FM

AM

y

75

COAXIAL

Connecting a ground wire

If you connect an outdoor aerial, be sure to connect a
earth lead (not supplied) to the AM ANTENNA

y

terminal (in addition to the AM loop aerial) for
lightning protection.

IEC female type connector

FM wire aerial

FM outdoor aerial

IEC female type
connector

Amplifier hookups

Connect the tuner to an amplifier. Be sure to turn off
both components before connection. For the specific
location of the terminals, see the illustration below.

LINE OUT

What cables will I need?

• Audio cord (supplied) (1)

Connect the white plugs to the white (L) jacks and the red
plugs to the red (R) jacks. Insert the plugs completely into
the jacks; incomplete connections may cause noise.

ç

TUNER IN

R

L

LINE OUT

R

L

Mains lead hookup

Connect the mains lead to a wall outlet after
completing all of the previous connections.

/

Red (R)

White (L)

White (L)

Red (R)

Amplifier

Tuner

to a wall
outlet

Advertising