Asus Wireless Dual-band PCI-E Card PCE-N53 - Manual (Page 21)

PCE-N53 Wireless Dual-band Card Manual
18 ASUS Wireless Dual-band Card
Configuration - Encryption
The Encryption page allows you to set
up the encryption settings for your WLAN
card. For data confidentiality in a wireless
environment, IEEE 802.11 specifies a
Wired Equivalent Privacy (WEP) algorithm
to offer transmission privacy similar to
wired network. WEP uses keys to encrypt
data packets sent and decrypt data packets
received. The encryption process can scramble frame bits to avoid disclosure to
others. Wi-Fi Protected Access (WPA) is an improved security system for 802.11
that encrypts data sent over radio waves. WPA is developed to overcome the
weakness of the WEP protocol.
Network Authentication - Set up authentication for your WLAN card. Options are:
Open - Sets the network operating in the Open System mode that disables
authentication protection for the network or use the WEP encryption for the
network.
Shared - Sets the network operating in the Shared Key mode that uses the
WEP encryption for your network.
WPA-PSK/WPA2-PSK - Use the WPA Pre-Shared Key/WPA2 Pre-Shared Key
in the Infrastructure mode for authentication.
Data Encryption - In the Open and Shared authentication modes, options are:
Disabled and WEP.
Disabled - Disables the encryption protection for your WLAN card.
WEP - Encrypts the data before it is transmitted over the air. You can
communicate with wireless devices that use the same WEP keys.
In the WPA-PSK and WPA2-PSK authentication modes, options are: Temporal Key
Integrity Protocol (TKIP) and Advanced Encryption Standard (AES).
TKIP - Dynamically generates unique keys to encrypt data packet.
AES - Offers stronger protection and increases the complexity of wireless
encryption. It is a symmetric 128-bit block encryption method that works
simultaneously on multiple network layers.