Sound, Channels, General – Sony KDL-15G2000 User Manual

Page 34

Advertising
background image

34

GB

Sound

Problem

Cause/Remedy

No sound, but good picture

• Press 2 +/– or % (Mute).

Noisy sound

• See the “Picture noise” causes/remedies on page 33.

Channels

Problem

Cause/Remedy

The desired channel cannot be
selected

• Switch between digital and analogue mode and select the desired digital/

analogue channel.

Some channels are blank

• Scrambled/Subscription only channel. Subscribe to the Pay Per View

service.

• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.

Digital channel is not displayed

• Check that the aerial is plugged directly into the TV (not through other

equipment).

• Contact a local installer to find out if digital transmissions are provided in

your area.

• Upgrade to a higher gain aerial.

General

Problem

Cause/Remedy

The TV turns off automatically
(the TV enters standby mode)

• Check if the “Sleep Timer” is activated, or confirm the setting of “Off

Time” (page 23).

• If no signal is received and no operation is performed in the TV mode for

10 minutes, the TV automatically switches to standby mode.

The TV turns on automatically

• Check if the “On Time” is activated (page 23).

Some input sources cannot be
selected

• Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input

source (page 24).

The remote does not function

• Replace the batteries.

Advertising