Sony PCGA-BA1 - Manual (Page 22)

22 GB
Preparing to make a dial-up connection
1
Turn on the Bluetooth cell phone or modem and set it to
allow discovery.
For details, see the manual provided with the cell phone.
2
Turn on the computer and insert the Bluetooth USB adapter
into the USB port (page 14).
3
Click the “Start” button and click “Control Panel”.
4
Click the “Network and Internet Connections” icon.
5
Click the “Network Connections” icon.
The “Network Connections” window appears.
6
Click “Create a new connection”.
The “Welcome to the New Connection Wizard” window appears.
7
Click “Next”, check that “Connect to the Internet” is selected,
and click “Next”.
If the option is not selected, click so that it becomes .
When you click “Next”, the “Getting Ready” window appears.
8
For the item “Set up my connection manually”, click so
that it becomes . Then click “Next”.
The “Internet Connection” window appears.
9
Verify that “Connect using a dial-up modem” is checked, and
click “Next”.
If the option is not checked, click so that it becomes .
When you click “Next”, the “Select a Device” window appears.