Altinex DA1914SX - Manual (Page 4)

SWITCHERS
3
required to correct the interference at his own
expense.
•
Any changes or modifications to the unit not
expressly approved by Altinex, Inc. could void
the user’s authority to operate the equipment.
ABOUT YOUR SWITCHER 2
The DA1914SX is a 2-in, 1-out RGBS Auto
Switcher with manual remote capability through
contact closure. Using four Female BNC
connectors for each input and output, the
DA1914SX has a fully buffered output.
The DA1914SX offers a Sync Source switch,
enabling it to auto-switch RGBS signal formats
when placed in the SYNC position, and auto-switch
RGsB and Composite Video signals when placed in
the GREEN position. Composite Video signals
must be passed through the Green channel when
auto-switching is necessary. When two active
sources are present, the DA1914SX will select the
default input, which is Input 2.
The DA1914SX can be controlled manually by
connecting a latching contact closure control to its
2.5mm mini-coaxial remote control jack. The
DA1914SX comes with a small switch and a 6 foot
cable (part# RC5203CC) that performs the manual
switch function, or contact closure may be made
from a control system. The contact closure acts as
a “push”, switching back and forth between two
active sources and switching between ON and OFF
when a single active source is on Input 1. If a
single active source is on Input 2 (the default), the
manual control will not push to Input 1.
In auto-switch mode, the DA1914SX is perfect for
applications in which a user plugs in one of two
input plates at different locations. In manual mode,
the DA1914SX is great as an
ON/OFF switch or for simply switching between two
active computers.
The DA1914SX may be mounted to furniture or
other suitable surfaces using optional hardware.
TECHNICAL SPECIFICATIONS 3
FEATURES/DESCRIPTION DA1914SX
GENERAL
Inputs
2
Input Connectors Two 4-BNC Female
Outputs 1
Output Connectors 4-BNC Female
Compatibility RGBS, RGsB,
Component Video (Y,
R-Y, B-Y), S-Video
(Y/C), and Composite
Video
Table 1. DA1914SX General
MECHANICAL DA1914SX
Material 0.1” Al
Finish Gray
Top Panel Lexan
Height (inches) 3.50in (89mm)
Width (inches) 4.62in (117mm)
Depth (inches) 1.00in (25mm)
Weight (pounds) 0.4lbs (0.18kg)
Ship Weight (pounds) 2.0lbs (0.91kg)
T
°
Operating 10
°
C-35
°
C
T
°
Maximum 50
°
C
Humidity 90
%
non-condensing
MTBF (calculations) 40,000 hrs
Table 2. DA1914SX Mechanical
ELECTRICAL DA1914SX
Input Video Signals
Analog Signal
1.5V p-p max
Impedance 75 Ohms
Input Sync Signals
Composite Sync
TTL(+/-)
Sync on Green -0.3V
Impedance 10 k Ohms
Output Video Signals
Analog Signal
1.5V p-p max
Fall/Rise Time (ns) 2.0
Impedance 75 Ohms
Output Sync Signals
Composite Sync
TTL(+/-)
Sync on Green -0.3V
Impedance 22 Ohms
Frequency Compatibility
Typical Video Bandwidth
350 MHz