Sony XNV-660BT - Manual (Page 59)

59
Screen settings
Touch c “Screen” c the desired item c the desired option. For details on this procedure, see “Basic
setting operation” on page 55.
Follow the page reference for details. “z” indicates the default setting.
Item Option Purpose Unit status
RBE (Rear Bass Enhancer)
(page 52)
Uses rear speakers as a
subwoofer.
OFF (z),
RBE1, RBE2,
RBE3 To select the mode.
During reception/
playback.
Crossover Filter
Selects the cut-off frequency
of the front/rear speakers
(HPF) and subwoofer (LPF).
LPF: 50 Hz,
60 Hz, 80 Hz,
100 Hz (z),
120 Hz To select the cut-off
frequency. (Available only
when “Subwoofer” is set to
“ON.”)
During reception/
playback.
HPF: OFF (z) To not cut out the
frequency.
HPF: 50 Hz,
60 Hz, 80 Hz,
100 Hz, 120 Hz To select the cut-off
frequency.
Subwoofer
Phase:
Normal (z),
Reverse To select the subwoofer
phase. (Available only
when “Subwoofer” is set to
“ON.”)
4.1ch Speaker Level
(page 52) – –
Unit off.
Item Option Purpose Unit status
Screen Select (page 53) – – Any status.
Picture EQ (page 53) Dynamic (z),
Standard,
Theater, Sepia To select the picture
quality.
During video/
image playback.
Custom 1,
Custom 2 To customize the picture
quality.
Aspect (page 54) Full (z),
Normal,
Wide,
Zoom To select the screen aspect
ratio.
During video/
image playback.
Clock
Shows/hides the clock display
in the bottom right corner of
the display.
ON (z) To show the clock display.
Any status.
OFF To hide the clock display.
Demo ON (z) To activate the
demonstration.
Unit off.
OFF To deactivate the
demonstration.