Airpura Industries P600 - Manual (Page 2)

Motor out of the air flow. Most air purifiers blow the clean air over
the motor and pick up new impurities before exhausting it.
P600
Photocatalytic Oxidization
18 lbs Activated carbon bed. Adsorbs airborne chemicals and
gases like a sponge
Superior quality HEPA filter 10 pleats per inch (others have only 6-8)
with separators to avoid sticking together, warm rolled to avoid cracking
results in more effective filtration
Vacuumable pre-filter Simply vacuum through the mesh or change
as necessary. 56 sq in filtration surface.
Felt gaskets seal the filter chamber. Maximize filtration with no
rubber off-gassing found with other filters
All metal housing ensures no plastic vapors are emitted
Variable speed motor lets you choose your ideal level of filtration
2 Micro-suppress filters around the carbon bed supress any
microorganisms
Pressure seals on filter chamber ensures all air is filtered Other systems
allow dirty air to escape and fail to achieve their promised HEPA
rating of 99.97% filtration
20 Watt UV germicidal lamp positioned in the filter chamber sterilizes
microbes as they are trapped on the filters
True HEPA filter traps 99.97% of particles as small as 0.3 microns including
antigens, pathogens and mold spores. 40 sq ft filtration surface
Important Features
Titanium Dioxide Photocatalytic Oxidization
Technical
Specifications
Photocatalytic Oxidization reflector
US patent pending #29249549
Titanium Dioxide (TiO2) coated
reflector surface
TitanClean TM
Your
Airpura
Dealer
The Most Complete Chemical and VOC Filtration Available Today
20 watts. 30,000 um per sec
2
Air Flow 560 cfm
18 lbs activated carbon
13" x 13" x 9"
120 on high 40 on low
115 or 220 volts
570 sq in x 1in deep
45lbs total
Conforms to ANSI / UL 507 and
CSA C22.2 no 113
28.1 db on low (at 6 feet)
62.3 db on high (560 cfm)
(Room level 25.1 db)
Carbon bed
More cfm than any other home
unit available
Odor & chemical filtration
2" deep x 570 sq'' surface
Pre-filter
Size
23" x 15"
Weight
Voltage Options
Watts
ETL Certified
Sound Level
Particle removal
40 sq ft true HEPA
(Measured 1 side only)
10 pleats per inch
Pleats warm rolled with
separators
UV Germicidal Lamp
Housing
Powder coat steel
Safely Breaks Down Harmful Chemicals and Odors
No ozone
Developed and used in space technology laboratories for both air and water purification
the Photocatalytic Oxidation (PCO) process is simple and elegant.
The TitanClean Reflector provides a large amount of TiO2
coated surface area (115% of the width of the UV lamp)
The Airpura TitanClean Reflector
The location of the TitanClean reflector and the UV light
in the center of the filter chamber allows them to work in
concert with the HEPA filter.
The angled reflector design maximizes the range of
photo-catalytic oxidation within the filter chamber and
increases the germicidal effect of the lamp.
The UV germicidal lamp maintains 98% of its direct irradiation
intensity due to the interior position of the TitanClean reflector
Particulate pollution is stopped by the Hepa filter before
reaching the reflector. This keeps the coated surface
cleaner and more effective.
A metal surface coated with a metal oxide is irradiated with UV light to produce
hydroxyl radicals and super-oxide ions.
The hydroxyl radicals and super-oxide ions break the molecular bonds of chemicals they
come into contact with and slice them into smaller compounds, that are further broken
down until only carbon dioxide and water vapor are left.
For maximum efficiency, the process requires a sufficient surface area of reflective metal
coated with a metal oxide to be positioned at a critical distance from the UV lamp while
still allowing a good flow of air to bring the aiborne chemicals into contact with the
resulting hydroxyl radicals and super-oxide ions.
Premium Titanium Dioxide Coating
The Airpura P600
+
The Airpura P600
+
model features a premium titanium dioxide coated surface area.
The specially coated Hepa filter offers an additional 3 times the photocatalytic capacity
to deal with especially heavy concentrations of airborne chemicals.
The TitanClean reflector
positioned in the center
of the filter chamber
The TitanClean Catalytic Oxidizer combined with the 18lb
Activated Carbon filter offers the most complete airborne
chemical and VOC abatement available today
Contact time of airborne chemicals is increased as they slow
down passing through the Hepa.
The diffusion of the germicidal dosage from the
UV lamp is enhanced in the confined chamber.