Sony CDP-CX250 - Manual (Page 14)

Playing CDs
14 EN
You can go to the next disc during 1␣ DISC Shuffle Play
Press DISC SKIP +.
You can specify the next disc to play during 1␣ DISC
Shuffle Play
Turn the JOG dial to specify the next disc. After all the
tracks on the current disc are played in random order,
the next disc starts playing. If you want to skip to the
next disc right away, press ENTER while playing the
current disc.
Notes
• You cannot specify the next disc to play during ALL DISCS
Shuffle Play.
• Even if you press p or turn off the player during ALL
DISCS Shuffle Play, the player remembers which discs/
tracks were played and which were not. Therefore, if you
want to start ALL DISCS Shuffle Play again from the
beginning, be sure to repeat the procedure from Step 1.
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks and/or discs to
create three different programs and programs are
stored automatically. A␣ program can contain up to 32
“steps” — one “step” may contain a track or a whole
disc.
You can make programs using the controls on the
remote as well as ones on the player. However, the
programming procedures are different.
Creating a program on the player
1
Press PROGRAM until the program number you
want (PROGRAM␣ 1, 2 or 3) appears in the display.
If a program is already stored in the selected
program number, the last step of the program
appears in the display. When you want to erase the
whole program, hold down CLEAR until “ALL
CLEAR” appears in the display (see page 16).
2
Turn the JOG dial until the disc number you want
appears in the display.
JOG ENTER PROGRAM
·
≠/±
CLEAR CHECK
PROGRAM1
CD1
DISC
*DISC-2O*
2O
3
To program a whole disc, skip this step. Press
≠/± until the track number you want
appears in the display.
4
Press ENTER or PROGRAM.
5
To program other discs/tracks, do the following:
To program
Other discs
Other tracks on the same disc
Other tracks on other discs
6
Press · to start Program Play.
To cancel Program Play
Press CONTINUE.
Repeat Steps
2 and 4
3 and 4
2 to 4
Track number
The disc being
programmed Playing order
The track being programmed
PROGRAM1
CD1
DISC TRACK STEP
2O 3 1
2O
PROGRAM1
CD1
DISC TRACK STEP
2O 3 1
2O