Sony PMC-R30L - Manual (Page 30)

Additional Information
30 GB
Troubleshooting
Symptom
The power is not on.
There is no audio.
Noise is heard.
“NO DISC“ lights in the display
even when a CD is in place.
The CD does not play.
The sound drops out.
The audio is weak or has poor
quality.
The picture of your TV becomes
unstable.
The station name does not appear in
the display though you are listening
to an FM program.
Remedy
• Connect the mains lead to a wall outlet securely.
• Make sure that the speakers are connected
correctly.
• Make sure the function you want to use appears
in the display.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
• Someone is using a portable telephone or other
equipment that emits radio waves near the
player. n Move the portable telephone, etc.,
away from the player.
• Insert the CD with the label surface up.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Make sure “CD” appears in the display.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the player in a location free from
vibration.
• Move the player away from the TV.
• If you are using the remote while listening to
MW/LW radio, noise may be heard. This is
unavoidable.
• If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
• The RDS function of this player will not be
activated if the station you are tuning in does
not provide RDS services.
General
CD Player
Radio