ACR Electronics GlobalFix RLB-37 - Manual (Page 8)

Y1-03-0242 Rev. B 7
2. Anatomy of your beacon
NOTE: When unpacking your beacon, it is recommended that you save the
original packaging for re-use when shipping the beacon for battery
replacement in the future.
// Activation switch with Witness Tab
The activation switch embodies a special, patented method of activating a
beacon. Refer to a subsequent section of this manual for how to activate the
beacon.
// Internal GPS engine
The internal GPS engine is located where it can most readily get a clear view
of the sky.
Antenna
Strobe Light
GPSInterface
Red/Green LEDs
Internal GPS
Receiver
Digital Display
Screen
Manual Activation
Switch
Lanyard
Water Activation
Sensors
Grips
Battery
Housing