Overview, Steps – Sony TDG-BT400A User Manual
Page 5
5
GB
GB
Overview
Active 3D Glasses needs registration to TV.
When using Active 3D Glasses with another TV, re-registration is necessary.
Steps
1
Remove the battery’s insulating
sheet before using the product
for the first time.
2
When using Active 3D Glasses for
the first time, hold the glasses
within a 50 cm range of the TV
and turn on the TV and hold the
1
(Power) button/indicator for
2 seconds. The Active 3D Glasses
turn on and registration starts
(The 1 (Power) button/indicator
blinks green and yellow). When
registration is finished, a message
appears in the bottom right of
the screen for 5 seconds, and the
indicator will light up green for
3 seconds. This process is only
required one time.
If registration fails, the Active 3D
Glasses will turn off automatically.
In this case, repeat the above.
1
(Power)
button / indicator
Insulating
sheet
To turn on and off
To turn on : Press once the power button.
To turn off : Hold the power button down for 2 seconds.